Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives

 
 
Thread Tools Rate Thread
  #1  
Old 11-10-2017, 01:21 PM
rodsmith (Rod)
Registered User

rodsmith is offline
 
Join Date: Dec 2012
Location: Northern N.S.W.
Posts: 17
ADM saddle

I'm after an ADM saddle to suit an NEQ6 with the newer
style puck.

If you have one without a puck I'd be happy with that as I can machine a puck to suit.

Thanks, Rod.

Last edited by rodsmith; 11-11-2017 at 10:52 AM.
  #2  
Old 09-11-2017, 10:16 AM
rodsmith (Rod)
Registered User

rodsmith is offline
 
Join Date: Dec 2012
Location: Northern N.S.W.
Posts: 17
Saddle

No fun on page 2

Rod
  #3  
Old 09-11-2017, 01:39 PM
Mamba (David)
Registered User

Mamba is offline
 
Join Date: Apr 2015
Location: Langwarrin Melbourne
Posts: 99
Hello Rod,
I have a G11 saddle plate, if you have machining facilities it may be of use, if so contact me.
The saddle is 8 inches long, two 5/16 holes with 1/2 countersinking and centres of 3 inches, only the 3inch dovetail, no vixen, one 4 inch sliding clamp.If of any use please contact me with your e mail address as i am unable to post a photo on here for some reason

Dave Cooke
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 02:51 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement