#1  
Old 25-10-2019, 05:25 PM
Rainmaker (Matt)
Excalibur Industries.....

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 73
Tripod Extension DIY

The new scope is somewhat longer than my other ones so the Takahashi EM400 tripod needed a little more height for the scope to clear the legs......

After an hour on the lathe, a half metre of solid 30mm aluminium became 6 pieces at 70mm which were then bored through for 8mm cap screws.... then onto the spin polisher for a bit of bling

The tripod adapter was chucked on the lathe next and a 3mm flange became a pile of shiny shavings on the floor....

After a few minutes bolting it together the scope clears the tripod legs with room to spare

The OTA also received a new carbon fibre handle to make the thing more manageable
Attached Thumbnails
Click for full-size image (MIS_7661.jpg)
107.0 KB22 views
Click for full-size image (MIS_7662.jpg)
121.3 KB28 views
Click for full-size image (MIS_7663.jpg)
108.9 KB32 views
Click for full-size image (MIS_7657.jpg)
127.8 KB23 views

Last edited by Rainmaker; 25-10-2019 at 05:36 PM.
Reply With Quote
  #2  
Old 25-10-2019, 06:03 PM
Wilso (Darren)
Registered User

Wilso is offline
 
Join Date: Nov 2016
Location: Gawler
Posts: 306
Nice one Matt
Pristine as always.

Can you do an offset spacer behind the saddle and mount in lieu of under the mount?
The reason Im asking is I would like to do that to my Pm-1 mount to clear the fork to give greater clearance for the scope. Im only talking 20-25mm though. A small extra counter weight would be required also to offset.

Would this work?
Reply With Quote
  #3  
Old 25-10-2019, 06:38 PM
Rainmaker (Matt)
Excalibur Industries.....

Rainmaker is offline
 
Join Date: Jun 2019
Location: Canberra
Posts: 73
Quote:
Originally Posted by Wilso View Post
Nice one Matt
Pristine as always.

Can you do an offset spacer behind the saddle and mount in lieu of under the mount?
The reason I’m asking is I would like to do that to my Pm-1 mount to clear the fork to give greater clearance for the scope. Im only talking 20-25mm though. A small extra counter weight would be required also to offset.

Would this work?
That would certainly work, I actually moved the OTA out 25mm by placing riser blocks between the dovetail bar and rings but still needed more clearance so added these stilts....

You can just make out the polished ends of the risers in the pic with the handle...
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:12 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Meade Australia
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
Celestron Australia
Advertisement
SkyWatcher Australia
Advertisement
Lunatico Astronomical
Advertisement
OzScopes Authorised Dealer
Advertisement
Astronomy and Electronics Centre
Advertisement