#1  
Old 20-07-2013, 05:10 AM
Skyhawk's Avatar
Skyhawk (Justin)
Registered User

Skyhawk is offline
 
Join Date: Jun 2013
Location: Cape Town, South Africa
Posts: 25
Cutting my OTA

I have an 8" f/5 Skywatcher Newtonian. Obviously with a T-adaptor I cannot get focused. Removing the T-adaptor and connecting the T-Ring dirctly to the focuser, which the Skywatcher can do allows me to focus. However I cannot use any filters doing this as there is no T-Adaptor in the train.

I'm going to have to cut the tube, the question is by how much for a DSLR?
I've looked around IIS forums and have come up with anything from 25mm to 55mm, also if I cut the tube by say 35mm do I just need a 35mm extender to do normal observations with my eyepieces?

Also thinking about getting the F5 Coma Corrector, so not sure how this is all going to affect how I cut my tube.

Any advice?

Many thanks
Reply With Quote
  #2  
Old 20-07-2013, 08:55 AM
rmuhlack's Avatar
rmuhlack (Richard)
Professional Nerd

rmuhlack is offline
 
Join Date: Nov 2011
Location: Strathalbyn, SA
Posts: 873
Why not just use longer bolts and springs for your main mirror. I did this on my old newtonian - cost was just a few dollars at the local hardware store
Reply With Quote
  #3  
Old 20-07-2013, 09:01 AM
Lee's Avatar
Lee
Colour is over-rated

Lee is offline
 
Join Date: Sep 2005
Location: Newcastle, Australia
Posts: 2,414
Do it.... it's a quick/simple process.
I documented my go at it in 2006 - here.
Funny enough not long after that I bought a CCD, and hardly ever used the newt with the DSLR (apart from some moon shots occasionally...), but have used it visually with no problems.
Moving the mirror will obviously adjust the balance of the OTA in whatever mount you use....

Your EPs will then come to focus with an extender.
Reply With Quote
  #4  
Old 20-07-2013, 09:51 AM
kinetic's Avatar
kinetic (Steve)
ATMer and Saganist

kinetic is offline
 
Join Date: Jun 2008
Location: Adelaide S.A.
Posts: 2,260
Lee's and Clive's (Alchemy) articles are a good resource.
Best to read up and understand the consequences and benefits
before the cut.
I'd advise against mounting the mirror on longer springs btw,
although for a smaller 8" mirror, mirror flex might be minimal.
I did the cut on my 12" OTA, never looked back.
I can still do visual with a low profile Crayford focuser and an
extension tube/ tubes.

Clive's article is here:
http://www.iceinspace.com.au/63-441-0-0-1-0.html

Steve
Reply With Quote
  #5  
Old 20-07-2013, 11:30 AM
RobF's Avatar
RobF (Rob)
Mostly harmless...

RobF is offline
 
Join Date: Jul 2008
Location: Brisbane, Australia
Posts: 5,451
On the consequences side remember you will also be decreasing the distance between primary and secondary in your lightpath.

This might another option to consider: http://www.iceinspace.com.au/forum/s...an+adaptor+m54
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:11 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Celestron Australia
Advertisement
Bintel
Advertisement
Lunatico Astronomical
Advertisement
NexDome Observatories
Advertisement
SkyWatcher Australia
Advertisement
OzScopes Authorised Dealer
Advertisement
Meade Australia
Advertisement
Astronomy and Electronics Centre
Advertisement