#1  
Old 05-05-2016, 07:55 PM
luka's Avatar
luka
Unregistered User

luka is offline
 
Join Date: Apr 2007
Location: Perth, Australia
Posts: 1,108
Same thread sizes don't fit

I recently IR modded (full mod) my DSLR and got Baader IR/UV-cut filter to block the IR.

The imaging setup consists of:
ED80 - Hotech SCA flattener - T-ring - Canon 1200D
and now the IR/UV-cut filter has to be screwed into the Hotech SCA flattener (on the ED80 side).

Both the IR/UV-cut filter and the flattener have standard 2" size with M48 threads... but they don't fit into each other.

The filter goes in about 1 turn and stops (it is not all the way in). Normally I would say that the threads have a different pitch but the filter fits nicely into several other M48 pieces I have and then other M48 pieces fit nicely into the flattener. Actually I can do a "full circle" - the filter fits into one of the spare adapters; which fits into another adapter; which fits into the flattener. Everything fits perfectly indicating that the threads are the same and that the filter should fit into the flattener. But it does not.

This is driving me nuts. Any ideas? Is it just sloppy tolerances? (all parts are new)
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:34 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
NexDome Observatories
Advertisement
Celestron Australia
Advertisement
SkyWatcher Australia
Advertisement
OzScopes Authorised Dealer
Advertisement
Lunatico Astronomical
Advertisement
Meade Australia
Advertisement
Astronomy and Electronics Centre
Advertisement