#1  
Old 24-04-2019, 08:21 PM
Wilso (Darren)
Registered User

Wilso is offline
 
Join Date: Nov 2016
Location: Gawler
Posts: 280
Detached barlow

Hi all,

Just looking at using my Takahashi Barlow attached directly to an eyepiece to give me a specific focal length.
This barlow was designed to be used before the diagonal so I'm wondering if there's a formula for calculating the magnification change when used this way?
Is it as simple as the % in focal length difference by moving the Barlow and then applied to the barow magnification?

Any help would be much appreciated!!
Cheers

Last edited by Wilso; 24-04-2019 at 08:33 PM.
Reply With Quote
  #2  
Old 24-04-2019, 08:31 PM
Wavytone (Nick)
BigBanger

Wavytone is offline
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 3,882
Treating the eyepiece and Barlow as simple positive and negative lenses yes it it feasible to compute the required separation but it is necessary to know the focal length of the Barlow as well as that of the eyepiece. Since both are actually comprised of several elements it is necessary to determine the nodal points and use these to set the separation - which is non-trivial because you will need an optical bench to find the nodal points experimentally.

A rough way is to assemble diagonal + Barlow and eyepiece the way Takahashi intended and measure the spacing with a ruler along one side parallel to the approximate optical axis, maintaining this separation should achieve what you want.
Reply With Quote
  #3  
Old 24-04-2019, 09:40 PM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 6,812
Darren,
You can easily measure the negative focal length of your barlow, then use that to calculate, using it's position relative to the prime focus, to give the position of final focus and the amplification factor.
The barlow focal length:
Measure the free diameter of the barlow lens (say 30mm)
Position a card with a circle twice the diameter (ie 60mm) and project the sun until it fills the circle.
The distance from the card to the lens is the focal length.
Hope this helps.
ken
Reply With Quote
  #4  
Old 25-04-2019, 10:31 AM
Wilso (Darren)
Registered User

Wilso is offline
 
Join Date: Nov 2016
Location: Gawler
Posts: 280
Thanks guys for the help.

Nice simple way of determining the magnification change Ken.
Cheers
Reply With Quote
  #5  
Old 25-04-2019, 11:37 AM
ab1963's Avatar
ab1963 (Andrew)
Refractors-Thatís It

ab1963 is offline
 
Join Date: Jan 2015
Location: sydney
Posts: 311
I have the Swaro 25x50w zoom that i connect to a Baader VIP barlow but here is a picture of a system someone has worked out for the Leica with the said barlow and might be a direction for you to go in and hope it helps
Attached Thumbnails
Click for full-size image (post-30887-0-88838500-1398110078.jpg)
49.9 KB19 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 09:56 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
OzScopes Authorised Dealer
Advertisement
Celestron Australia
Advertisement
NexDome Observatories
Advertisement
Meade Australia
Advertisement
Bintel
Advertisement
Lunatico Astronomical
Advertisement
SkyWatcher Australia
Advertisement
Astronomy and Electronics Centre
Advertisement