#1  
Old 14-11-2017, 07:54 AM
Kaneb (Kane)
Registered User

Kaneb is offline
 
Join Date: Nov 2017
Posts: 4
Hi, I'm new

Good Morning,

I've had my 8" collapsible Skywatcher dobsonian for almost 2 years now and have observed many amazing deep space objects. I had a go at taking a photo of Saturn and the moon the other night and it went quite well considering its a dob and I had no camera adaptor mount at the time.

Anyways long story short I got a lot of satisfaction in being able to take a photo instead of observing and recording and am keen to explore astrophotography further.

Now I see it is quite easy to convert a non-collapsible scope to an Equatorial Mounted version...my question is am I able to convert the collapsible version over. Looking at it, it would appear as if the current centre of gravity would not sit well on the EQ mount.
Reply With Quote
  #2  
Old 14-11-2017, 08:53 AM
brian nordstrom (As avatar)
Registered User

brian nordstrom is offline
 
Join Date: Apr 2007
Location: Perth WA
Posts: 4,374
Hi Kane and welcome .

I don't know much about mounting your 8 inch Dob onto an EQ mount but I would say it can be done.
Personally I would look at getting a second hand HEQ5 and ED80 class scope for astrophotography and keep the Dob purely visual as you would need an EQ6 to mount the 8 inch properly and you could get the above for about the same price that will be better in the long run.

Both the HEQ5 and ED80 show up here all the time in the classifieds at good prices.

Any chance of posting your shots for us to have a look at .

Brian.
Reply With Quote
  #3  
Old 14-11-2017, 09:17 AM
xelasnave's Avatar
xelasnave
Gravity does not Suck

xelasnave is offline
 
Join Date: Mar 2005
Location: Tabulam
Posts: 16,866
Hi Kane
Welcome from me.
The advice Brian gives is good.
Astro photography is easy to start by holding a camera up to the ep and getting something but it will be no time where you will demand better..
Your first consideration is a good mount..eq5 will carry a good 80 mm which works well..have a look at the images on the net from folk using an 80mm.

I believe an eq5 will carry a 8 inch newtonian if that appeals.
An 8 inch ota will cost approx $500 and to that you probably will need to add a coma corrector so add another $350 ?. so for $2000 you should gain entry.

I have gone for an 8 inch on a eq6 f5 which hopefully should deliver some reasonable captures but I also have in mind either adding a 80 mm or 100 mm refractor to my kit.

If starting out like you I think the 80 mm on an eq5 will prove most satisfying.



You could set your sites higher on an eq6.

good luck

alex
Reply With Quote
  #4  
Old 14-11-2017, 01:01 PM
_Jimmy (Loren James)
Registered User

_Jimmy is offline
 
Join Date: Mar 2016
Location: Perth
Posts: 36
Yup just going to third the advice for an heq5 and ed 80 to start. Learn the skills and techniques on that setup as it will be easier and forgiving, then as you perfect that move up to bigger!
Reply With Quote
  #5  
Old 15-11-2017, 07:43 AM
Kaneb (Kane)
Registered User

Kaneb is offline
 
Join Date: Nov 2017
Posts: 4
Thanks for the info, very helpful.

I think I will go for the ED80 on a HEQ5. Will be a lot easier to lug it out to the backyard compared to the 8" dob. I was very surprised at the quality of images on the net, impressive!

Can I confirm that the collapsible style tube can be mounted on a EQ5 or 6 mount?

I have also attached my photo's from the other night. I used PIPP, Registax and Lightroom to refine the video of Saturn to produce that image...first time so go easy on me.
Attached Thumbnails
Click for full-size image (Saturn1.jpg)
31.0 KB85 views
Click for full-size image (Moon_.jpg)
180.2 KB69 views
Click for full-size image (Moon Close Up.jpg)
183.8 KB72 views
Reply With Quote
  #6  
Old 15-11-2017, 08:11 AM
jenchris's Avatar
jenchris (Jennifer)
Registered User

jenchris is offline
 
Join Date: Nov 2010
Location: Ormeau Gold Coast
Posts: 2,067
Nice.
Good advice above.
The heq5 is a nice solid mount with excellent output. You'll get many years service and a decent resale value.
Reply With Quote
  #7  
Old 15-11-2017, 09:58 AM
ZeroID's Avatar
ZeroID (Brent)
Lost in Space ....

ZeroID is offline
 
Join Date: May 2010
Location: Auckland, NZ
Posts: 4,949
Hi Kane, Welcome to IIS.
I don't think a collapsible can be mounted to an EQ5\6. Normally a solid tube scope is required so the scope can be approx. mid mounted to achieve balance.
Some special truss type scopes are designed especially for that role, (google Serrurier Truss) but most collapsibles are designed to be packed away for transport and don't have a suitable mount point on the struts.
Reply With Quote
  #8  
Old 16-11-2017, 09:50 PM
PhilTas (Phil)
Registered User

PhilTas is offline
 
Join Date: Apr 2013
Location: Darwin
Posts: 189
Hi Kane,
Phil here from Darwin - you know who I am.

Welcome. !! This is a great forum.

Your photos are excellent considering the method you used to take them.

I reckon that with a bit of engineering, you could mount the collapsible dob on an eq mount. I am thinking to connect a long board or plate between the upper and lower sections, so that the board is the full length of the scope. A dovetail plate mounts to the board.

I call it a board, a better description might be “braced section”. Prime construction considerations would be rigidity and lightness.
It would have to mount to the scope in such a way so it did not induce any change in collimation. I’ll do a sketch later and post.
Cheers Phil
Reply With Quote
  #9  
Old 16-11-2017, 10:35 PM
raymo
Registered User

raymo is offline
 
Join Date: Sep 2011
Location: margaret river, western australia
Posts: 6,070
Physically you actually could mount an 8" SW collapsible on an HEQ5
if you are good at D.I.Y. , they are balanced further down the tube
than solid tube models are, hence the position of the swivel points.
The scope would need to be supported immediately below the collar at the top of the solid tube.
The real problem is weight. With the weight of the necessary D.I.Y.fittings
and a dovetail plate, and imaging equipment, the mount would struggle.
An 8" solid tube would be o.k.[I used that setup for years] because it
only needs tube rings and a dovetail, and ends up lighter.
The board or plate would not work. Firstly it would have to be heavy, and
with an HEQ5 weight would be your enemy. Secondly it would have to be incredibly solid[rigid] to avoid flexing which would stuff up the
collimation.
!00% agree with Kaneb, ED80 or ED100 would be good starting point.
raymo
Reply With Quote
  #10  
Old 20-11-2017, 03:45 AM
erick's Avatar
erick (Eric)
Starcatcher

erick is offline
 
Join Date: Dec 2006
Location: Gerringong
Posts: 8,532
Welcome aboard Kane!
Reply With Quote
  #11  
Old 26-11-2017, 12:58 AM
brian nordstrom (As avatar)
Registered User

brian nordstrom is offline
 
Join Date: Apr 2007
Location: Perth WA
Posts: 4,374
Nice , nice and nice .
Brian .
Quote:
Originally Posted by Kaneb View Post
Thanks for the info, very helpful.

I think I will go for the ED80 on a HEQ5. Will be a lot easier to lug it out to the backyard compared to the 8" dob. I was very surprised at the quality of images on the net, impressive!

Can I confirm that the collapsible style tube can be mounted on a EQ5 or 6 mount?

I have also attached my photo's from the other night. I used PIPP, Registax and Lightroom to refine the video of Saturn to produce that image...first time so go easy on me.
Reply With Quote
  #12  
Old 26-11-2017, 01:02 AM
brian nordstrom (As avatar)
Registered User

brian nordstrom is offline
 
Join Date: Apr 2007
Location: Perth WA
Posts: 4,374
Brothers . but yes true .
Brian
Quote:
Originally Posted by xelasnave View Post
Hi Kane
Welcome from me.
The advice Brian gives is good.
Astro photography is easy to start by holding a camera up to the ep and getting something but it will be no time where you will demand better..
Your first consideration is a good mount..eq5 will carry a good 80 mm which works well..have a look at the images on the net from folk using an 80mm.

I believe an eq5 will carry a 8 inch newtonian if that appeals.
An 8 inch ota will cost approx $500 and to that you probably will need to add a coma corrector so add another $350 ?. so for $2000 you should gain entry.

I have gone for an 8 inch on a eq6 f5 which hopefully should deliver some reasonable captures but I also have in mind either adding a 80 mm or 100 mm refractor to my kit.

If starting out like you I think the 80 mm on an eq5 will prove most satisfying.



You could set your sites higher on an eq6.

good luck

alex
Reply With Quote
  #13  
Old 26-11-2017, 01:15 AM
brian nordstrom (As avatar)
Registered User

brian nordstrom is offline
 
Join Date: Apr 2007
Location: Perth WA
Posts: 4,374
lookey here
Attached Thumbnails
Click for full-size image (WP_20171125_23_04_43_Pro (2).jpg)
199.9 KB53 views
Reply With Quote
  #14  
Old 26-11-2017, 01:18 AM
brian nordstrom (As avatar)
Registered User

brian nordstrom is offline
 
Join Date: Apr 2007
Location: Perth WA
Posts: 4,374
CAT"s Love them all.

Brian.
Attached Thumbnails
Click for full-size image (WP_20171125_23_05_33_Pro (2).jpg)
199.9 KB58 views
Reply With Quote
  #15  
Old 26-11-2017, 02:48 PM
Andrew_Campbell (Andrew)
Registered User

Andrew_Campbell is offline
 
Join Date: Dec 2013
Location: Perth - Southern Suburbs
Posts: 19
Welcome aboard, Kane.
Reply With Quote
  #16  
Old 28-11-2017, 06:26 PM
bigjoe (JOSEPH)
Registered User

bigjoe is offline
 
Join Date: Nov 2010
Location: sydney
Posts: 1,363
Good luck with your endeavours Kane , and stick with it.
bigjoe.
Reply With Quote
  #17  
Old 29-11-2017, 08:57 PM
alan meehan's Avatar
alan meehan (Alan)
Registered User

alan meehan is offline
 
Join Date: Jul 2005
Location: maryland newcastle AUSTRALIA
Posts: 1,812
welcome to iceinspace Kane,nice photos by the way
ALAN
Reply With Quote
  #18  
Old 30-11-2017, 07:34 AM
Kaneb (Kane)
Registered User

Kaneb is offline
 
Join Date: Nov 2017
Posts: 4
Thanks you to all for your advice and welcoming words.

I'm hitting gumtree with anything lying around to raise the cash to buy myself a beginners astro-photography kit as mentioned.

The weather is very hit and miss up here this time of year so not missing out on too much at the moment.

Thanks again

Kane
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:47 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement