ICEINSPACE
Most Read Articles
Moon Phase
CURRENT MOON First Quarter
44.2%
The Sun Now
Time Zones
Sydney*
7:48 am
Perth
4:48 am
Auckland*
9:48 am
New York
3:48 pm
Paris
9:48 pm
GMT
8:48 pm




Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives

 
 
Thread Tools Rate Thread
  #1  
Old 01-01-2018, 10:13 PM
ellinbank (Peter)
ellinbank

ellinbank is offline
 
Join Date: Dec 2009
Location: Ellinbank, Victoria, Australia
Posts: 24
ST10 camera with CFW 10 filter wheel

I have for sale a SBIG ST10XME camera and a CFW 10 filter wheel. Non anti blooming. The KAF3200ME chip is the most sensitive of the front illuminated chips, just under 90% in the V band.
Cooling to 40C below ambient.
The CFW 10 holds 10 1.25" filters.
The camera and wheel are in good condition and work perfectly. There are no filters mounted in the filter wheel.
Bias, dark (5s) and image of omega cen attached.
At this stage prefer not to seperate. The front plate is included should you decide to separate them.
Power supply included, both 12V and 240V.
$3800 now $3200.
Attached Thumbnails
Click for full-size image (IMG_3264.jpg)
142.9 KB195 views
Click for full-size image (IMG_3265.jpg)
147.2 KB172 views
Click for full-size image (IMG_3266.jpg)
162.4 KB182 views
Click for full-size image (IMG_3269.jpg)
162.4 KB192 views
Click for full-size image (IMG_3270.jpg)
154.2 KB167 views
Click for full-size image (20160720-ST10-Omega-2x2-0001030.jpg)
87.1 KB251 views
Click for full-size image (Master_Bias 17_1092x736_Bin2x2_Temp-30C_ExpTime0ms.jpg)
181.3 KB174 views
Click for full-size image (Master_Dark 134_1092x736_Bin2x2_Temp-30C_ExpTime5s.jpg)
184.2 KB150 views

Last edited by ellinbank; 03-03-2018 at 04:59 PM. Reason: update info
  #2  
Old 05-02-2018, 09:43 AM
ellinbank (Peter)
ellinbank

ellinbank is offline
 
Join Date: Dec 2009
Location: Ellinbank, Victoria, Australia
Posts: 24
BUMP Price reduction

Now $3500
  #3  
Old 07-02-2018, 10:19 AM
mjibrown (Michael)
Registered User

mjibrown is offline
 
Join Date: Oct 2017
Location: Clayton
Posts: 0
A couple of questions. How old is the CCD? What's the rough cooling time for the CCD? Does this CCD have a port for a remote guide head?
  #4  
Old 07-02-2018, 09:07 PM
ellinbank (Peter)
ellinbank

ellinbank is offline
 
Join Date: Dec 2009
Location: Ellinbank, Victoria, Australia
Posts: 24
St10

Hi Michael,

The cooling time is about 5-10 mins 40C below ambient.
The manufacture date is 2010.
Yes, it does have a remote guide head port. Its an XME.

Hope this helps
Peter
  #5  
Old 08-02-2018, 04:03 PM
mjibrown (Michael)
Registered User

mjibrown is offline
 
Join Date: Oct 2017
Location: Clayton
Posts: 0
Hi Peter,

Thank you for the prompt reply and useful information. Based on my ST7-xme, I thought I'd see the remote guide head port in http://www.iceinspace.com.au/forum/a...hmentid=222078. Where is the remote guide head port located on the ST10-xme?

Best regards,

Michael.
  #6  
Old 08-02-2018, 05:52 PM
ellinbank (Peter)
ellinbank

ellinbank is offline
 
Join Date: Dec 2009
Location: Ellinbank, Victoria, Australia
Posts: 24
St10xme

Hello Michael,
Mine must be an earlier model, as it does not have the remote guide head port. As you know it has an internal guider which I used with great success. I found that so long as the mount could keep a star centered for, say, 20 sec then you could use 5-10 sec guide exposures.
What mount do you have?
Is it essential for you to have a remote guide head?
Thanks
Peter
  #7  
Old 08-02-2018, 05:54 PM
ellinbank (Peter)
ellinbank

ellinbank is offline
 
Join Date: Dec 2009
Location: Ellinbank, Victoria, Australia
Posts: 24
St10mxe

Hi Michael,
Sorry, I did say that it did have the remote port, but I was getting confused with the RS232 port. I never used remote guiding.
Apologies
Peter
  #8  
Old 08-02-2018, 09:56 PM
mjibrown (Michael)
Registered User

mjibrown is offline
 
Join Date: Oct 2017
Location: Clayton
Posts: 0
Hi Peter,
No worries. I'm considering this for a Celestron C11 on a Losmandy G11 mount, which mostly behaves although it does produce the occasional large error when slewing or tracking. The remote guide head is useful when those errors arise.
Cheers,
Michael.
  #9  
Old 08-02-2018, 10:31 PM
ellinbank (Peter)
ellinbank

ellinbank is offline
 
Join Date: Dec 2009
Location: Ellinbank, Victoria, Australia
Posts: 24
St10xme

Good luck with your decision, let me know if I can offer any assistance.
The G11 should guide sufficiently well to use the internal guider.

Cheers Peter
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:48 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Advertisement
SkyWatcher WiFi Adaptor
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
OzScopes Authorised Dealer
Advertisement
Atik Horizon
Advertisement
FLI Cameras and Imaging Accessories
Advertisement
Lunatico Astronomical
Advertisement
SkyWatcher 2018 Catalogue
Advertisement
Interest Free Finance
Advertisement
Astronomy and Electronics Centre
Advertisement