Go Back   IceInSpace > Equipment > Astrophotography and Imaging Equipment and Discussions

Reply
 
Thread Tools Rate Thread
  #1  
Old 17-03-2012, 01:42 PM
apaulo (Paul)
The Surfing Astronomer

apaulo is offline
 
Join Date: Jan 2010
Location: Balnarring
Posts: 385
Turning off Dark Frame Substraction with the Pentax K x

Hello Everyone,

One of the main problems using the Pentax K x with astro photography is the inability to turn off the Automatic Dark Frame Substraction (DFS).If your sub is over 30 seconds the camera will utilise this function, regardless how you set the Noise Reduction options.

This is frustrating when it takes roughly 110 minutes to collect an hours worth of data. Battery life is seriously reduced and the thermo noise is constantly rising.
The firmware has attempted to remove the hot pixels and thermo-noise but the results are rather disappointing.
As a result the dark frames you take are useless and you are left with severe limitations when processing due to the gouging out the dark, flat, bias and light frames.

After looking at my pentax camera and wondering "If there isnt an better excuse to buy and CCD now there never will be". My wife suggested to seek a possible answer via the internet.

To my surprise and disappointment there is a whole page full of websites dealing with this exact issue. The best ones being:

http://ricehigh.blogspot.com.au/2011...btraction.html


http://www.pentaxforums.com/forums/p...s-success.html


The modest.492 and sysparam.txt files are here (attached file) or you can obtain them from the above listed websites.

Your pentax needs to have the latest firmware installed. Firmware 1.00 will not work. To check what firmware you have simply press the menu button while turning on the camera. After 5 seconds it will return to normal operating mode.
I have just installed 1.03 and the debugging now works and I have managed to easily turn off the DFS.

The firmware update can be found at pentax.
http://www.pentax.jp/english/support/digital/k-x_s.html

Now I can image more data without the wait and have to look for another excuse to be allowed to purchase an CCD.

Please note the ONUS is on you for the above mentioned alterations.

Regards Paul.

Last edited by apaulo; 17-03-2012 at 02:40 PM.
Reply With Quote
  #2  
Old 17-03-2012, 04:39 PM
Big Dave's Avatar
Big Dave (Dave)
Telescopes keep me poor

Big Dave is offline
 
Join Date: May 2008
Location: Cranbourne, Victoria, Australia
Posts: 297
Nice write up.
Note: This does not happen on the K7 or K5. A few people may think Kx, where x represents any number. Silly model number sequence from Pentax!
Reply With Quote
  #3  
Old 18-03-2012, 09:37 AM
stevous67 (Steve M)
Registered User

stevous67 is offline
 
Join Date: Jul 2008
Location: Melbourne, Australia
Posts: 633
That's good news Paul! Can't wait to see what happens next to your future images.

Good luck.

Steve
Reply With Quote
  #4  
Old 18-03-2012, 02:52 PM
Satchmo's Avatar
Satchmo (Mark)
Registered User

Satchmo is offline
 
Join Date: Dec 2005
Location: Sydney
Posts: 1,858
I have a Kx also so I look forward to seeing your results , Paul.
Reply With Quote
  #5  
Old 18-03-2012, 04:18 PM
apaulo (Paul)
The Surfing Astronomer

apaulo is offline
 
Join Date: Jan 2010
Location: Balnarring
Posts: 385
Pentax

Thanks Steve

You started the whole thing rolling Steve! I am surprised the internet provided the answers I needed.
Mark its a easy process upgrading and running the debug program.
The program is not permanent Mark, you can easily turn it off in two ways.
One via the menu option and two via the debug program itself.
The proof will be in the pudding though weather pending I will be going to Snake Valley and will get a good idea then.

Regards Paul.
Reply With Quote
  #6  
Old 18-03-2012, 11:28 PM
Poita (Peter)
Registered User

Poita is offline
 
Join Date: Jun 2011
Location: NSW Country
Posts: 3,585
The k-r does not have this issue either.
Reply With Quote
  #7  
Old 11-06-2012, 09:10 AM
cometcatcher's Avatar
cometcatcher (Kevin)
<--- Comet Hale-Bopp

cometcatcher is offline
 
Join Date: Jan 2005
Location: Cloudy Mackay
Posts: 6,125
This worked for me and my K-x. Many thanks!
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 10:51 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Celestron Australia
Advertisement
OzScopes Authorised Dealer
Advertisement
Bintel
Advertisement
SkyWatcher Australia
Advertisement
Lunatico Astronomical
Advertisement
Meade Australia
Advertisement
NexDome Observatories
Advertisement
Astronomy and Electronics Centre
Advertisement