Go Back   IceInSpace > Equipment > Eyepieces, Barlows and Filters

Reply
 
Thread Tools Rate Thread
  #1  
Old 21-03-2018, 09:18 AM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 5,990
TV Powermates For DSLR Planetary Imaging

Has anyone had any experience using Televue Powermates, in particular the 2.5x and 4x for DSLR planetary and Lunar imaging

I am currently using a Canon 600D , 150mm F6 reflector on a HEQ5 mount and a 2" 2 x Barlow for Jupiter, Saturn and the Moon in average seeing conditions in Sydney night skies ( I also observe from a good dark site down the south coast at my holiday house but I use Sydney as a test base for any new equipment due to the poorer seeing conditions )

Reports from various other forums say that the Powermates have an advantage over Barlows for imaging

My 2" 2 x Barlow works extremely well for Lunar and Planetary visual observation and Lunar imaging, however not so good with Planetary imaging

I welcome any advice and comments in regard to using Powermates for Planetary imaging

Thanks in advance
Reply With Quote
  #2  
Old 21-03-2018, 09:27 AM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
I use TV powermates for solar imaging and spectroscopy.

They, as you probably know, have excellent optics and can be used at different back focus with minimal change to the amplification.

I use the 1.25" x2.5 with the T thread adaptor to give f18.75 on the ED80 for close up solar images, and the 2" x4 sometimes on the Genesis f5 to push it to f20.

(Rule of thumb - the imaging focal ratio should be around x4 or x5 the pixel size (in micron) This means with a 5 micron camera using around f20 to f25.

Hope that helps.
Reply With Quote
  #3  
Old 21-03-2018, 01:52 PM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 5,990
Thanks for the reply Ken and expert comments

I read an interesting article just a short time ago from Jerry Lodriguss on planetary imaging with a DSLR

He suggests to use the following formula for estimating the ( general rule of thumb ) focal length for detailed planetary imaging

FL = 8/ (P/S)

where P=image scale per pixel in arc sec ( use 1/3 arc sec or 0.33 )
S=size of pixel in microns

My Canon 600D is 4.3 micron

FL= 8/(0.33/4.3)
FL =104 inches or 2700mm

My scope has a FL = 900mm

2700/900 = 3 x mag required ( therefore F18 )

So therefore a 2.5x Powermate or 4x Powermate with my DSLR should provide good planetary detail

Of course atmospheric seeing conditions and location of planet ( > 50deg Alt ) are huge factors as well

Whats your thoughts on the above method and calcs ??
Reply With Quote
  #4  
Old 21-03-2018, 01:59 PM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
I think Jerry has more experience than me....
I'd certainly take his recommendations on board.
Reply With Quote
  #5  
Old 21-03-2018, 03:20 PM
astro744
Registered User

astro744 is offline
 
Join Date: Apr 2007
Posts: 1,244
Don't forget the T-Ring adapters to get the design amplification factor.

See http://www.televue.com/engine/TV3b_p...d=123&Tab=_con and

http://www.televue.com/engine/TV3b_p...d=123&Tab=_app and

http://www.televue.com/engine/TV3b_p...d=123&Tab=_acc

The top eyepiece housing unscrews and the T-Ring adaptor replaces it. One available for 2" 2x, one for 2" 4x and one that does both 1.25" 2.5x and 1.25" 5x.
Reply With Quote
  #6  
Old 21-03-2018, 03:31 PM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 5,990
Thanks for the heads up Astro744

Yeh I checked uncle Al's website on Powermates and he shows you the set up of a 2.5x and 4x with T ring adapters etc..

Makes life easier when an Astro accessory is designed ready to fit to your scope or camera

Welcome any other comments/advice from DSLR / Powermate astrophotographers
Reply With Quote
  #7  
Old 21-03-2018, 03:35 PM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
For solar with the ASI 174 I also need to add a T2 tilter between the PM and the camera.....
Attached Thumbnails
Click for full-size image (100_3362.JPG)
87.7 KB18 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:46 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement