ICEINSPACE
Most Read Articles
Moon Phase
CURRENT MOON Waxing Crescent
31.8%
The Sun Now
Time Zones
Sydney
1:43 pm
Perth
11:43 am
Auckland*
4:43 pm
New York*
11:43 pm
Paris*
5:43 am
GMT
3:43 am




Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rate Thread
  #61  
Old 02-05-2017, 09:56 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
I've done some ray tracing of my own and, not surprisingly, got the same results.
I also explored the possibility of a null test, for back reflection from R2 through R1 and for autocollimation with a flat. I could not get a good enough null for either setup with a simple null lens.
Looks like I have to make the test plate for R2 and leave the figuring of R1 last, as a complete instrument in autocollimation.
Reply With Quote
  #62  
Old 18-06-2017, 01:54 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
Still extremely slow progress with this project. One reason is that I took on the job of salvaging a brand new 10" astrograph that came with unusable optics and for which the manufacturer failed to take the responsibility of replacing it with a usable one. Well, it turned out to be a much bigger job that I thought it would be and it's been using up much of my spare time. The primary mirror needed complete regrinding/figuring to get rid of major astigmatism, plus a very long list of other mechanical and optical problems that needed fixing.

Anyway, I purchased 3 slices of aluminium alloy 6061, 178 diameter, for the main structural parts, and I cast an Ultracal30 disc for the R2 test plate lap. I prefer alloy 7075 for my projects, for its hardness, but the 6061 alloy also anodizes very well and it is much easier to obtain.
Attached Thumbnails
Click for full-size image (Alu6061.JPG)
103.3 KB26 views

Last edited by Stefan Buda; 18-06-2017 at 06:03 PM.
Reply With Quote
  #63  
Old 09-07-2017, 09:21 AM
SimmoW's Avatar
SimmoW (SIMON)
Adapter Collector

SimmoW is offline
 
Join Date: Jan 2014
Location: Hastings, Victoria, Australia
Posts: 1,037
Amazing work as ever Stefan.

Can you at least pm me the manufacturer of the 10 inch so I avoid them in future? Publication of their negligence would be preferred though.

Hey, I'm thinking of getting some aluminium tube rings made for my new 10 inch made by Alistair Sam, 314mm external diameter, do you know of a good cnc guy who charges reasonably? And will want them red anodized :-)

Oh, good luck with your Malin award shortlisted pics.
Reply With Quote
  #64  
Old 09-07-2017, 07:11 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
Hi Simon,
I bumped into you today before I saw your post.
On this link you can read about the scope, but the problems listed are only minor compared to what I found when I started pulling it apart and began testing and measuring all components: http://myastroshop.com.au/ssmassey/r...-10-review.htm

Getting back to the Honders, I did put into it only a few hours since my last post, but not so my 3D printer. The second set of 3D prints for the sacrificial OTA mandrel is done. Another marathon, 52 hours of printing.
This mandrel is 10mm smaller in diameter than the first one.
Attached Thumbnails
Click for full-size image (MandrelOTAa.JPG)
131.6 KB40 views
Click for full-size image (MandrelOTAb.JPG)
179.9 KB33 views
Reply With Quote
  #65  
Old 09-08-2017, 07:59 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
I took advantage of the heatwave today (17C) to cast the lap for the R2 test plate.
Attached Thumbnails
Click for full-size image (R2TestPlateLap1.JPG)
94.3 KB25 views
Click for full-size image (R2TestPlateLap2.JPG)
105.0 KB28 views
Click for full-size image (R2TestPlateLap3.JPG)
91.6 KB27 views
Reply With Quote
  #66  
Old 10-08-2017, 07:35 PM
blink138's Avatar
blink138 (Pat)
Registered User

blink138 is offline
 
Join Date: Aug 2009
Location: perth w.a.
Posts: 2,058
Quote:
Originally Posted by Stefan Buda View Post
I finished the small lenses, except for the AR coatings.
For the coatings I can think of three possible options:
1. Find someone that can BBAR coat them for me.
2. Just do my own single layer magnesium fluoride AR coating.
3. Upgrade my vacuum system and do my own BBAR coating.

Problem with the first option is that I'm not aware of anyone doing commercial BBAR coatings in Australia, except for spectacle makers perhaps.
Problem with the second option is that single layer AR coating on low index crown glass is not as good as BBAR - 1% vs 0.25% reflectivity per surface across the spectrum.
Problem with number three: Big learning curve.

hi stefan i am a spectacle maker and i may be able to get the latest multi coatings done for you / glass is rarely used in opthalmics these days and a different mixture, from memory is used, but i have a lot of contacts of independant grind laboratories around australia
pat
Reply With Quote
  #67  
Old 10-08-2017, 09:03 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
Hi Pat,

That sounds very promising. Please let me know if you find someone willing to do it. The refractive index of BK7 is not all that different from the ophthalmic plastics, so the coatings could be very similar I guess.

Stefan
Reply With Quote
  #68  
Old 10-08-2017, 10:23 PM
blink138's Avatar
blink138 (Pat)
Registered User

blink138 is offline
 
Join Date: Aug 2009
Location: perth w.a.
Posts: 2,058
blank size may be the limiting factor but i will make some enquiries
pat
Reply With Quote
  #69  
Old 11-08-2017, 09:45 AM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
Pat,

At this stage I would prefer to have only the two small lenses coated and they are only 50.8 diameter.
I would wait with the three large surfaces until I have the complete OTA tested under the stars.

Stefan
Reply With Quote
  #70  
Old 15-08-2017, 10:28 AM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
R2 test plate finished.
Attached Thumbnails
Click for full-size image (R2TestPlateFinal.jpg)
125.6 KB44 views
Click for full-size image (R2TestPlateIF.jpg)
63.8 KB39 views
Reply With Quote
  #71  
Old 22-08-2017, 09:26 AM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
Some progress on the metal front. The rear reinforcement ring for the dew shield is done, as far as the turning is concerned.
First I skimmed the three aluminium discs on the lathe to make them flat and reduced the OD closer to the required size. Then I trepanned one of the discs and glued it onto another so that a can machine it distortion free.
The deep groove (2.5x2.5) in the middle is for a string of heating resistors. The shallow, angled groove is for engaging three spring loaded pins, when the dew shield is fully extended. There is also a 5mm wide undercut for a strip of self adhesive synthetic velvet, intended to prevent the scratching of the OTA when the shield is moved back and forth.
Attached Thumbnails
Click for full-size image (DewShieldRing0.JPG)
128.5 KB29 views
Click for full-size image (DewShieldRing1.JPG)
124.6 KB30 views
Click for full-size image (DewShieldRing2.JPG)
152.5 KB32 views
Click for full-size image (DewShieldRing3.JPG)
105.1 KB27 views
Reply With Quote
  #72  
Old 13-09-2017, 10:18 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
Good progress on the metal front. All aluminium parts finished on the lathe, apart from the focuser components. After I drill all the required holes this lot will go to the anodizers.
Attached Thumbnails
Click for full-size image (FrontLensHousing.JPG)
136.3 KB25 views
Click for full-size image (AllAluParts.JPG)
183.4 KB27 views
Reply With Quote
  #73  
Old 14-09-2017, 04:44 PM
Wavytone
Fringe Lunatic

Wavytone is online now
 
Join Date: Jul 2008
Location: Killara, Sydney
Posts: 2,406
All very nice Stefan !
Reply With Quote
  #74  
Old 24-09-2017, 09:47 PM
Stefan Buda
Registered User

Stefan Buda is offline
 
Join Date: Jul 2013
Location: Melbourne, VIC
Posts: 291
Thanks Wavytone.

The weather has warmed up finally and I was able to proceed with some of the glass work.
The front lens is fully polished and R2 is figured against the test plate.
The R1 figuring will be done last, when the whole OTA is complete.
Attached Thumbnails
Click for full-size image (R2PolishingLap.JPG)
145.7 KB7 views
Click for full-size image (R2Polishing.JPG)
158.5 KB7 views
Click for full-size image (R2FinalTest.JPG)
112.2 KB10 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 01:43 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Advertisement
FLI Cameras and Imaging Accessories
Advertisement
OzScopes Authorised Dealer
Advertisement
Bintel
Advertisement
Meade Instruments
Advertisement
Atik 16200
Advertisement
Tasco Australia
Advertisement
SkyWatcher Star Discovery
Advertisement
Lunatico Astronomical
Advertisement
Astronomy and Electronics Centre
Advertisement