Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives

 
 
Thread Tools Rate Thread
  #1  
Old 17-06-2018, 11:26 AM
Hisanori's Avatar
Hisanori (Hisanori)
Registered User

Hisanori is offline
 
Join Date: Jul 2015
Location: Sydney (Hornsby, NSW)
Posts: 106
T-2 (female) 2-in Eyepiece Holder

I have Baader prism diagonal (#2456095) with T-2 "male" thread.
I need a 2 inch EP holder with T-2 "female" thread. Not sure such EP holder exists? Otherwise I should get a thread coverter (T-2 female to 2 inch male) and a 2-in EP holder (with 2 inch female thread)?
Attached Thumbnails
Click for full-size image (baader-2inch-deluxe-clamp-eyepiece-holder-2408140.jpg)
48.3 KB5 views

Last edited by Hisanori; 30-06-2018 at 01:57 PM.
  #2  
Old 17-06-2018, 12:28 PM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
You may find a T thread (female) to SCT thread then add a SCT to 2” adaptor??
  #3  
Old 17-06-2018, 01:09 PM
Kunama
...

Kunama is offline
 
Join Date: Sep 2012
Posts: 3,588
Here you go Hisanori:

https://agenaastro.com/baader-2-clic...d-2956242.html
  #4  
Old 17-06-2018, 01:23 PM
Hans Tucker (Hans)
Registered User

Hans Tucker is offline
 
Join Date: Jul 2008
Location: Melbourne
Posts: 2,449
Have you been onto the Baader website to see the configuration?
Attached Thumbnails
Click for full-size image (baader-t-2-stardiagonal-zeiss-prism-with-bbhs-coating-t-2-part-01b-216.jpg)
129.8 KB11 views
  #5  
Old 17-06-2018, 05:26 PM
Hisanori's Avatar
Hisanori (Hisanori)
Registered User

Hisanori is offline
 
Join Date: Jul 2015
Location: Sydney (Hornsby, NSW)
Posts: 106
Oh thanks Ken, Matt, Hans. There is one! I have Baader 1.25-in EP clamp (with T-2 femal thread) but want to use 2-in EP as well.
  #6  
Old 17-06-2018, 05:39 PM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
Matt’s link shows a 2” version of the cliplock.....
  #7  
Old 17-06-2018, 06:36 PM
Hans Tucker (Hans)
Registered User

Hans Tucker is offline
 
Join Date: Jul 2008
Location: Melbourne
Posts: 2,449
Quote:
Originally Posted by Hisanori View Post
Oh thanks Ken, Matt, Hans. There is one! I have Baader 1.25-in EP clamp (with T-2 femal thread) but want to use 2-in EP as well.
So get the Baader 2" ClickLock Eyepiece Clamp (#2956242) and the Baader 2" to 1¼" ClickLock Reducer (#2956214). This combination will allow you to use both 1.25 & 2 inch eyepieces.

https://www.baader-planetarium.com/e...ce-clamps.html

https://www.baader-planetarium.com/e...part-15b).html
Attached Thumbnails
Click for full-size image (baader-2-to-1-1-4-clicklock-reducer-t-2-part-15b-b5f.jpg)
189.3 KB4 views

Last edited by Hans Tucker; 17-06-2018 at 06:48 PM.
  #8  
Old 17-06-2018, 08:46 PM
Hisanori's Avatar
Hisanori (Hisanori)
Registered User

Hisanori is offline
 
Join Date: Jul 2015
Location: Sydney (Hornsby, NSW)
Posts: 106
Thanks Hans, "click-lock" is expensive may be I get those ones..

https://www.365astronomy.com/2-Delux...SC-female.html

https://www.365astronomy.com/Reducer...oth-sides.html
Attached Thumbnails
Click for full-size image (baader-2inch-deluxe-clamp-eyepiece-holder-2408140.jpg)
48.3 KB3 views
Click for full-size image (baader-2inch-t-2-reducer-2408190.jpg)
61.1 KB2 views
  #9  
Old 18-06-2018, 03:42 PM
Hans Tucker (Hans)
Registered User

Hans Tucker is offline
 
Join Date: Jul 2008
Location: Melbourne
Posts: 2,449
Quote:
Originally Posted by Hisanori View Post

As in the product description 2" Deluxe Clamp / Eyepiece Holder for SCT's with 2" SC female thread I am not sure this item would fit your T2 Diagonal as the Eyepiece Holder apparently has a SC thread and not the T2 thread you require. You may need a Baader T-2 to SCT Thread Expanding Ring to get the Eyepiece Holder to fit.
  #10  
Old 18-06-2018, 08:25 PM
Hisanori's Avatar
Hisanori (Hisanori)
Registered User

Hisanori is offline
 
Join Date: Jul 2015
Location: Sydney (Hornsby, NSW)
Posts: 106
Thanks Hans, yes you are absolutely right. So if I get this thread converter should fit my diagonal?

https://www.365astronomy.com/Baader-...ical-path.html
  #11  
Old 19-06-2018, 04:17 PM
Hans Tucker (Hans)
Registered User

Hans Tucker is offline
 
Join Date: Jul 2008
Location: Melbourne
Posts: 2,449
Quote:
Originally Posted by Hisanori View Post
Thanks Hans, yes you are absolutely right. So if I get this thread converter should fit my diagonal?

https://www.365astronomy.com/Baader-...ical-path.html

Yes, that adapter should work. Just run all the part numbers by the vendor before you buy just to get their confirmation.
  #12  
Old 19-06-2018, 04:50 PM
Hisanori's Avatar
Hisanori (Hisanori)
Registered User

Hisanori is offline
 
Join Date: Jul 2015
Location: Sydney (Hornsby, NSW)
Posts: 106
Thanks a lot. I'm enquiring Baader in Germany. If no one comes up with good offer (lol), I will place an order. Cheers, Hisanori
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 12:44 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement