#1  
Old 12-06-2018, 09:49 PM
Tony_ (Tony)
Registered User

Tony_ is offline
 
Join Date: Oct 2011
Location: Melbourne, Australia
Posts: 458
Black spots - dead pixels?

G'day,


Recently I've notice several black spots on my images - like the group of 5 in this image. Are these dead pixels? If they are why would I get several all at the same time?
I've looked at the sensor and I can't see anything on it, also I've tried cleaning it.

Any ideas what the black dots are?
Camera = cooled modded canon 60d.


Tony.
Attached Thumbnails
Click for full-size image (black dots.jpg)
32.0 KB57 views
Reply With Quote
  #2  
Old 12-06-2018, 10:27 PM
glend (Glen)
Registered User

glend is offline
 
Join Date: Jun 2013
Location: Lake Macquarie, NSW
Posts: 5,028
Those are too big for pixels, probably dirt on your optics or the sensor. Check all the camera glass and use a puffer on the sensor to see if you can get rid of it. Shoot a flat to confirm it's there, it should show up.
Reply With Quote
  #3  
Old 13-06-2018, 08:38 AM
markas (Mark)
Registered User

markas is offline
 
Join Date: May 2012
Location: Melbourne Australia
Posts: 255
You need to determine whether the spots are always in the same places. The easiest way to do this is to use any old lens on the camera and shoot a clear daytime sky, then examine the raw image at 100%. You should see the offending spots easily



They certainly look too big to be dead pixels - but they also look too small and distinct to be dirt on the telescope optics.



If they are always in the same place, it would suggest 'intractable' dirt on the camera optics very close to the sensor. Such spots would be very hard to see directly without careful lighting and some magnification.



I have seen a Canon camera with grease spots on the cover plate which was VERY hard to remove, and required special solutions and tools - not for the inexperienced or faint-hearted! (This example took me several hours of work to remove the offending muck).


If you can establish that the spots are fixed, and not movable by blower, you would need to take the camera to a specialist cleaner. If they are movable, the best way to deal with them is to remove them using a special brush - NOT any old brush!!!. (I use the Visible Dust product range. Have a look at their website.)


Mark
Reply With Quote
  #4  
Old 13-06-2018, 08:55 AM
Atmos's Avatar
Atmos (Colin)
Ultimate Noob

Atmos is offline
 
Join Date: Aug 2011
Location: Melbourne
Posts: 5,821
If you’ve processed this image and some noise reduction, that would explain why they’re larger than single pixels as noise reduction will make a single back pixel larger at times.

We’re the frames dithered? If it is a dead/cold pixel then it’ll be removed during pixel rejection if they’re dithered.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 08:05 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Lunatico Astronomical
Advertisement
SkyWatcher 2018 Catalogue
Advertisement
Interest Free Finance
Advertisement
Bintel
Advertisement
SkyWatcher WiFi Adaptor
Advertisement
NexDome Observatories
Advertisement
OzScopes Authorised Dealer
Advertisement
Astronomy and Electronics Centre
Advertisement