#1  
Old 08-02-2018, 04:08 PM
Eris
Registered User

Eris is offline
 
Join Date: Mar 2007
Location: Mount Barker SA
Posts: 68
Taking Flat Field Frames

Hi everyone,
Please excuse me if this sounds a silly question but I would like to get some clarification about taking Flat Frames.

I am on the understanding that the use of good Flats etc are very important to how the final image will appear.

My question is if I were to take a series of Flats after my initial set up can I use these files for the entire observing session and image several other objects around the sky providing the camera and same filter position on the scope are not moved?

Or, do I need to take a new set of Flats if I point the unaltered scope or camera at another object?

Thanks for your advice and recommendations in advance.
Reply With Quote
  #2  
Old 08-02-2018, 04:41 PM
pfitzgerald's Avatar
pfitzgerald (Paul)
Registered User

pfitzgerald is offline
 
Join Date: Jun 2013
Location: Melbourne
Posts: 534
Hi Eris

Provided you don't change the camera's orientation between objects you can use the same flats. The idea of the flats is to remove vignetting at the corners of your image and also any 'dust bunnies' that would otherwise impair the quality of your final image.

Hope that helps.

Paul
Reply With Quote
  #3  
Old 08-02-2018, 04:43 PM
RickS's Avatar
RickS (Rick)
PI cult recruiter

RickS is offline
 
Join Date: Apr 2010
Location: Brisbane
Posts: 10,579
You can keep using the same flat masters so long as there's no significant change in your imaging train. Slight focus changes are usually OK. Slewing to a new object is fine. Rotating the camera (and filters together) is often OK unless there's some asymmetry of the image circle. What usually stops flats being useful is when you get new dust spots or a dust spot moves on the cover glass or a filter.

Cheers,
Rick.
Reply With Quote
  #4  
Old 08-02-2018, 08:30 PM
skysurfer's Avatar
skysurfer
Dark sky rules !

skysurfer is offline
 
Join Date: Dec 2011
Location: 52N 6E (EU)
Posts: 999
Rotation of the field can indeed make a different image circle which renders your flats made for one rotation invalid for another one, even when using the same image train.
Dust is avoidable. Most cameras (Nikon, Canon) have a manual dust cleaning option which allows to blow dust away from the sensor with a blowing bulb. This option pops up the mirror and shutter so you have access to the sensor. Obviously, no lens or telescope should be mounted, use a bare body. Do this when holding the camera facing downward to be sure all dust falls off when blowing. Do this before each astrophoto session.

And when you use Photoshop for post processing and use a lens with a lens profile (so not a telescope prime focus), you can just select the 'Lens correction' option and then select the lens you used. This eliminates the need for flats.
Do this after stacking and before post processing.
Reply With Quote
  #5  
Old 08-02-2018, 08:44 PM
Eris
Registered User

Eris is offline
 
Join Date: Mar 2007
Location: Mount Barker SA
Posts: 68
Sorry everyone I omitted to say that I am using a CCD camera with both lenses and scope.
Reply With Quote
  #6  
Old 09-02-2018, 02:50 PM
markbakovic's Avatar
markbakovic
Easily Confused

markbakovic is offline
 
Join Date: May 2016
Location: Syds
Posts: 33
you need a different master flat for every imaging configuration: lens/scope-filter/nofilter-camera(if different ones, even of the same exact model)-component relative orientation (eg if using a nosepeice or rotating camera mount for framing), but not for every target.

The flats (which you take a few of and combine into a master in the interests of averaging) are a sample of the path taken to each pixel by "identical" (hence "flat field") photons from the end of the sky to the start of your sensor, so that you can remove the variation your equipment introduces and approximate "what the sky would look like if your optics were perfect". Any change above the bottom of the sky (your choice of target, the atmosphere etc.) or below your sensor (the camera's amplifier bias, dark current etc.) are not the responsibility of the flat field to correct.

Rotations of sensor vs lens/telescope objective do matter, more the a) dustier/damaged the glass b) greater the number of optical elements, since nothing is perfect. Think about things like the inevitable nicks and shiny spots in the felt/baffling inside the OTA, or how many not-completely-blacked lens edges there are in an SLR lens. I tell people not to reuse flats between nights at the observatory for the simple reason that even if we left the camera attached (we usually don't), we park the scope, so the dust inside has all day to settle differently.

OK, that might sound like an argument for flat fielding again each time you switch targets, but there's also a "within reason" element to our use of time...
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:35 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
NexDome Observatories
Advertisement
SkyWatcher 2018 Catalogue
Advertisement
Lunatico Astronomical
Advertisement
SkyWatcher WiFi Adaptor
Advertisement
OzScopes Authorised Dealer
Advertisement
Interest Free Finance
Advertisement
Astronomy and Electronics Centre
Advertisement