#1  
Old 26-04-2016, 09:03 PM
Somnium's Avatar
Somnium (Aidan)
Aidan

Somnium is offline
 
Join Date: Oct 2014
Location: Sydney
Posts: 1,669
FLI cameras and PemPro v2

does anyone know how to connect a FLI camera with PEMPro. i am using the camera add on in TheSkyX to control the camera and the only options it gives are; CCDsoft, Maxim DL, MEADE DSI and AstroArt ... surely i dont have to buy Maxim DL, there must be others out there using FLI with PEMpro. i tried CCDsoft as it is the forerunner to theskyx camera add on but no dice.
Reply With Quote
  #2  
Old 27-04-2016, 05:13 AM
dsidote (Dave)
Registered User

dsidote is offline
 
Join Date: Dec 2013
Location: Austin, TX USA
Posts: 3
You can connect your camera via ASCOM using the beta version of Pempro V3. You can find it here.

Dave
Reply With Quote
  #3  
Old 27-04-2016, 06:35 AM
gregbradley's Avatar
gregbradley
Registered User

gregbradley is offline
 
Join Date: Feb 2006
Location: Sydney
Posts: 17,877
I have used Pempro V2 with a Proline. It worked fine. As mentioned I think it was through the Ascom option.

Greg.
Reply With Quote
  #4  
Old 27-04-2016, 07:27 AM
Somnium's Avatar
Somnium (Aidan)
Aidan

Somnium is offline
 
Join Date: Oct 2014
Location: Sydney
Posts: 1,669
I can't find the option to use an ascom camera ... The ascom logo is there but that just links off to the web page.
Attached Thumbnails
Click for full-size image (image.png)
8.9 KB15 views
Reply With Quote
  #5  
Old 27-04-2016, 08:17 AM
dsidote (Dave)
Registered User

dsidote is offline
 
Join Date: Dec 2013
Location: Austin, TX USA
Posts: 3
ASCOM is not available in V2. You have to use V3 beta.
Reply With Quote
  #6  
Old 27-04-2016, 08:24 AM
Somnium's Avatar
Somnium (Aidan)
Aidan

Somnium is offline
 
Join Date: Oct 2014
Location: Sydney
Posts: 1,669
Quote:
Originally Posted by dsidote View Post
ASCOM is not available in V2. You have to use V3 beta.
Thanks Dave, I will give that a go tonight
Reply With Quote
  #7  
Old 27-04-2016, 09:26 AM
Somnium's Avatar
Somnium (Aidan)
Aidan

Somnium is offline
 
Join Date: Oct 2014
Location: Sydney
Posts: 1,669
i just downloaded it to check it out and it seems like it gives a few more options, i can connect using theskyx camera, much better, thanks for letting me know
Reply With Quote
  #8  
Old 27-04-2016, 07:06 PM
dsidote (Dave)
Registered User

dsidote is offline
 
Join Date: Dec 2013
Location: Austin, TX USA
Posts: 3
Glad you got it sorted out.

I just read your thread on the SB forum. Did you figure out if PEC was the source of your RA oscillation? The pattern in your guide log looks periodic so it seems like it must be PEC related.
Reply With Quote
  #9  
Old 27-04-2016, 08:21 PM
Somnium's Avatar
Somnium (Aidan)
Aidan

Somnium is offline
 
Join Date: Oct 2014
Location: Sydney
Posts: 1,669
Quote:
Originally Posted by dsidote View Post
Glad you got it sorted out.

I just read your thread on the SB forum. Did you figure out if PEC was the source of your RA oscillation? The pattern in your guide log looks periodic so it seems like it must be PEC related.
hmm i have run the PEC both ways but it doesn't seem to help at all ... i am still running it, so hopefully i will know shortly but it dosnt look good
Reply With Quote
  #10  
Old 27-04-2016, 08:24 PM
Somnium's Avatar
Somnium (Aidan)
Aidan

Somnium is offline
 
Join Date: Oct 2014
Location: Sydney
Posts: 1,669
so i stopped the analysis of my "corrected PE" and i am still getting a 4.7 second peak to peak. this is down from 6.7 seconds but hardly sub arc second as would be in spec.
Reply With Quote
  #11  
Old 28-04-2016, 02:48 PM
PRejto's Avatar
PRejto (Peter)
Registered User

PRejto is offline
 
Join Date: Jan 2011
Location: Rylstone, NSW, Australia
Posts: 1,397
What is your image scale collecting PE? Is your camera rotated to PA=0 (or PA=180). TSX requires this, but perhaps PEMpro is more tolerant? Is your seeing good? If not try much later at night. I sawyour posts at the SB forum but thought I'd prefer to answer here. You certainly ought to be able to do a lot better. I got my MX to .6 arc-sec with PEMpro.

Peter
Reply With Quote
  #12  
Old 28-04-2016, 03:10 PM
Somnium's Avatar
Somnium (Aidan)
Aidan

Somnium is offline
 
Join Date: Oct 2014
Location: Sydney
Posts: 1,669
Quote:
Originally Posted by PRejto View Post
What is your image scale collecting PE? Is your camera rotated to PA=0 (or PA=180). TSX requires this, but perhaps PEMpro is more tolerant? Is your seeing good? If not try much later at night. I sawyour posts at the SB forum but thought I'd prefer to answer here. You certainly ought to be able to do a lot better. I got my MX to .6 arc-sec with PEMpro.

Peter
Hi Peter

Image scale: .45 arc seconds per pixel
Camera angle: it is currently at 5 degrees to the ra axis which should be close enough, though pempro does take this into consideration
Seeing: seeing is definitely average not sure exactly how much though

I was also expecting sub arc second pe, I will have another go tonight and see how it goes
Reply With Quote
  #13  
Old 28-04-2016, 05:16 PM
gregbradley's Avatar
gregbradley
Registered User

gregbradley is offline
 
Join Date: Feb 2006
Location: Sydney
Posts: 17,877
You may need to ask SB for a replacement worm. When PMX's first went out the PE was worse than what they promoted. Mine was fine but developed a sudden spike after several months. I let SB know and they originated sending a new worm. I installed the new worm and it was better than the original. Now I was getting low PE before PEC. After PEC it was quite low.

Greg.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:58 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement