Quote:
Originally Posted by pmrid
Cheers Alex,
here are a couple more pics I took for you. I note that you have already settled on a course of action but rather than waste these pics, I will attach them for the amusement of others.
Peter
|
Sorry for the delay in a reply.
First I thank you for going to the trouble of taking the photos and posting them.
What you show is really what I would like to do but it requires that I buy a welder, not a problem, but would have to build it in Sydney..anyways the more I have thought about it the more I have convinced myself that the ply and fiber glass overlay will do the job.
I mix black tile grout in my final layer of resin and lay a sheet of paper over the wet resin to produce a very smooth surface..so it should be strong and aesthetically pleasing...I will use two layers of form ply..which I have already rounded up.
Yesterday I took measurements and just about ready to start...
Alex