3.3V is grounded. The other voltages seem OK.
I already tested the regulator and DD2 EEPROM (by cutting tracks on the PCB) and they are fine. I also left the camera plugged in hoping that something will get hot... no luck, only the 3.3V regulator got hot. I have to stop now as I need to get a new regulator tomorrow, I totally butchered this one.
Knowing my luck it will be the FTDI chip, swapping an LQFP64 part will be "interesting".
By the way, I took apart the camera LOTS AND LOTS of times (>50) as I was experimenting with different methods of cooling. Every time the temperature sensor legs were bent and then bent back, no wonder one of them snapped.
|