Quote:
Originally Posted by codemonkey
My guess is stiction; that's roughly what would happen with my old EQ6 when the gear mesh was too tight (but loose enough so it wouldn't bind). I've no experience with the MX, but based off the guide charts, my previous experience, and your description of the DEC feeling "tight" that's what I'd be looking for. I'd be making a post on the Bisque forum or otherwise contacting them for advice.
|
I’m going to look at the posibility of binding gears this afternoon. To me it feels like that may be the culprit. Spent a couple of hours refining my polar alignment last night. Tested them guiding, and BANG, within 5 seconds the spikes appeared again. A little disappointing, but I’ll keep going!
Erik