Quote:
Originally Posted by pmrid
OK. That 55mm +/- 2mm from the CCD image plane to the outer edge of the T-RIng. So with a standard DSLR there is probably no need for the variable adapter you had made. It's use would be with CCD cams such as a QHY8 or Orion where the distance from the CCD chip to the ouser edge of the camera would only be 10-12 mm or so. The variable adapter would allow you to take that up to 55mm and THEN you screw in the MMPC. Have I got that right?
Peter
|
QHY8 CCD chip have a distance of 7mm from the chip to the top of outside casing or ~21mm from the chip to the nose piece, therefore you will need ~34mm of adapter spacing to the MPCC.
Cheers
Eddie