View Single Post
  #1  
Old 14-06-2019, 11:48 PM
thunderchildobs
Registered User

thunderchildobs is offline
 
Join Date: Dec 2006
Location: Ipswich, Qld, Aust
Posts: 609
How bright are you

and your lights?

Image A: The Qld Astrofest imaging field. Not my setup.
Image B: Testing a new observing tent. There is a laptop with a white image on the screen. The laptop is in a box. The light is still to bright.
Image C: A simple solution a tarp over the tent. Also do not point the laptop screens towards the open tent door. Even with the tent covered I would still put a red filter over the screen.
These images were all at 30 seconds at 1600ISO.


The following show how bad a red led torch can be. The torch was a Celestron firecell which has 4 led lights in it.

Image D: For reference picture of my house from 20m away with no torch lights.
Image E: The torch unmodified, 15 seconds held at head height.
Image f: The torch covered in black tape with a 5mm x 5mm hole over 1 led. Still to bright.
Image G: The torch unmodified looking directly in to the camera.
Image H: The torch with a covered lens.

The images are 15seconds at 1600ISO.

Obviously what you do in your backyard is not a problem, but at astrocamps it is another issue. Do you really need a torch that can light up buildings, telescopes and eyes from 20m away?

I wont be using the Firecell torch anywhere near any observing fields.
Attached Thumbnails
Click for full-size image (A_Tent_30secs.jpg)
75.7 KB109 views
Click for full-size image (B_Tent_30secs.jpg)
98.6 KB112 views
Click for full-size image (C_Tent_30secs.jpg)
96.2 KB127 views
Click for full-size image (D_House_30secs.jpg)
95.8 KB131 views
Click for full-size image (E_Torch_15secs.jpg)
102.4 KB154 views
Click for full-size image (F_Torch_Covered_15secs.jpg)
56.0 KB85 views
Click for full-size image (G_LED_15Secs.jpg)
80.5 KB127 views
Click for full-size image (H_LED_Covered_15Secs.jpg)
55.7 KB129 views
Reply With Quote