Gday all, just a quick update.
I finally got around to getting some plate steel for the top of my pier design. I ended up with 4x 10mm x 200 x 200 which i intend on welding 2 pieces together to make 20mm thickness pieces. i also may bore out the holes in the corners from 14mm to 19mm for 18mm bolts.
Also I picked up some pipe which might make good rollers, 2 cheap bearings jammed into the pipe to make longer rollers.
Progress is slow as money is extremely short at the moment.. but its getting there.
Thanks all for your support, I expect to be up and running late 2013
|