View Single Post
  #315  
Old 10-11-2010, 06:27 PM
GrahamL's Avatar
GrahamL
pro lumen

GrahamL is offline
 
Join Date: Jun 2006
Location: ballina
Posts: 3,263
Hi Gary
thanks for the feedback

Ok so I went through those and heres what I got

everthing did seem right on the settings
But when I checked the alt encoder direction the first time
it would read 90 - 94 -90 -94 all the way down

I checked the alt encoder pin mount screw as I've done before and it seems to have a good seat with the grub screw. I moved the pin in a little anyway and retightened.

I split the R4 plugs from the coupler at the bottom of my mounting pole and blew them out a little and clicked them back in .

Re did all the above checks and it seems to be stepping drown through
and returning to 90 (or very close)now .

The 90 /94 thing is something I havn't found before , though I have been looking for something amiss but hadn't been able to catch it out yet.

So i'll move on to an alignment later and see if its still happening..cheers I'll let you know how it goes
Reply With Quote