[Outcast (Carlton)]

Originally Posted by PeterM

Hi Carlton,

I tried both the 32mm then a 32mm and a 34mm then both 34mm. As I turned the pressure tuner with each combination I found that with both 34mm rings things felt less sloppy when tightened. I had also read much about the slight "pop" when you removed the black part of the tuner but I did not get any hint of a popping sound until I fitted both 34mm rings.
Lunt advised that some pressure tuners could benefit from the use of 34mm over 32mm, I guess due to machining tolerances.
So aside from that "pop" the result of my first views using PT and 34mm rings with a complete regrease has been what I was hoping for.

Thanks Peter...