Further from Mr Seibert
Quote:
Hi,
This is what you can get from SO. My adapter goes directly into a 2" or
1.25" focuser so that you can lock it in place with a thumbscrew. Then you
can attach whatever you want to my adapter. This is the choices you have.
My adapter can come with male t-threads or a 2" or 1.25" female receiving
eyepiece hole so that you can put a male 1.25" or 2" accessory into it. Or
it can come with standard 1.25" or 2" male or female threads. That is the
best I can do for you. I cannot spend several hours designing a series of
connectors for you unless you want to pay upwards of $300-$400 for me to
design them. My focus adapter needs to come first anyway in order to free
up focus. It will not work as well further down the line.
|
So I guess ZMCFA ==> Lumicon 2" Newt OAG <== MFCC or Paracorr Uni wont work unless there are special adapters ...
Guess I'll stick with a guidescope for now.