|
Hi
Thanks for the additional info. I will have to look up "the synchronise function" as I had not noticed, or I ignored, that looking through the manual.
Most of the things listed, I normally do, but, not necessarily all of them all the time. I do align and train with a 12mm illuminated reticule, but, possibly not slowly enough with the training.
I have used the high precision, but, I don't always remember to turn it. Powering off the handset turns it off.
I really need to get it connected to the computer and update it.
I do have a hint for you that may be useful. If you move your tripod by putting your hand underneath and holding the long bolt to lift and move, I found that the metal ribs dug into my hand. I happened to have a disk of aluminium the right diameter, drilled a hole in the middle - and now - everything is much more comfortable. Plywood or MDF would do the job just as well.
Once I have worked through the 'fixes' I may some queries, so thank you for the offer of further discussion.
Philip
|