Quote:
Originally Posted by DeanoNZL
Hi All,
Roger, when I made my 400d release, I crossed the two wires by mistake in the bulb connector, causing the same fault.
If you have made your own connection, try reversing the 2 wires.  |
Hi Roger, yes like Deeno mentions, check that there are no crossed wires etc and that the camera actually works fine with a normal remote just in case its in the camera...
Here is a link so you can check the pinouts..
Hope you sort it out..
http://www.camerahacker.com/RS60-E3_pin-out/pin-out.php