Thread: EQMOD issues
View Single Post
  #2  
Old 02-09-2016, 10:14 PM
Shiraz's Avatar
Shiraz (Ray)
Registered User

Shiraz is offline
 
Join Date: Apr 2010
Location: ardrossan south australia
Posts: 4,787
I would suspect the USB connection first (USB/serial hardware and the cables themselves, particularly any extension cables).

Also have a good look at the power connector on your EQ6 - the concentric connector on mine came slightly adrift from the board (the solder holding the socket failed). I replaced the connector system with a more substantial one and all intermittent drop-outs stopped.

good luck

Last edited by Shiraz; 03-09-2016 at 10:41 AM.
Reply With Quote