|
I've had a good look at the scope today and taken some pix for reference.
I'm still a novice at all this so some suggestions are a bit technical for my level of current understanding.
Some things i have noticed!
Some of you suggest that the rough sides to my mirror could be a problem. Had a good look at that and i can see an edge about 5mm of rough glass that runs around the primary.
There is a black ring that runs around the Central baffle outer edge that sits on the primary.
Same sorta ring sits inside the secondary where the baffle meets the glass.(picture included)
I also noticed my Moonlite focuser has a rather bright stainless hex head bolt that sits inside the focuser.
|