View Single Post
  #1  
Old 06-09-2020, 02:10 PM
britgc (Bret)
Registered User

britgc is offline
 
Join Date: Oct 2014
Location: Tasmania, Australia
Posts: 87
Intes MN66 Mak-Newt & Vixen SXD2 Mount w/ Starbook 10

Intes MN66 Maksutov Newtonian 6" F/6 Telescope - $1650 + shipping

Tube exterior has multiple paint chips/scuffs but the the rest of the telescope is in excellent condition including the optics, except for one small scratch which can be seen in image 7 (link below).
It was there when I purchased the scope second hand and has no effect on the wonderful views you get through this telescope.

Includes:
Soft carry case.
Telegizmos cover.
Collimation adjustment allen keys.
Cooling fan (rear fit).
Original Certificate of Optical Quality (Mike Palermiti)
Fitted with 2" JMI NGF-DX1 Dual Speed Crayford Focuser. Includes 2" to 1.25" adapter.
2" x 50mm and 2" x 35mm extension tubes.
Baader 2" Clicklock with 1/4" adapter.
Parallax Instruments Rotating Rings (7.64") on a Losmandy dovetail mounting plate 280mm x 100mm.
Orion Glass Solar Filter.
Astrozap Flexible Dew Shield.
Baader Sky Surfer V RDF (Day/Night version).
Also comes with original tuber holder with carry handle and original finderscope.


Vixen SXD2 Mount with Starbook 10 - SOLD

SXD2 mount with Starbook 10 and upgraded Declination axis with Kyoei SXP conversion kit: https://www.kyoei-osaka.jp/SHOP/kyoe...lti-clamp.html

The conversion kit makes the SXD2 similar to the SXP in that any saddle plate with 35mm centre to centre holes can be fitted.

Excellent condition overall (just a small paint chip covered by white tape) and functions perfectly.

Includes:
Starbook 10 with protective case.
HAL130 Tripod.
SXG Half Pillar.
2 x 3.7kg Counterweight
1 x 1.9kg Counterweight


Images

Last edited by britgc; 29-09-2020 at 11:31 AM.