|
Thanks heaps, worked a treat.
Something happened the first time round though.
Been working fine the first time round when playing around with the Ctrl and 1 button to slew the mount to a point in Stallerium.
I thought i would give those control in Stallerium a go, ( the ones under the telescope icon )
They messed everything up for some reason, as in you click on a star then click on the slew icon.
The mount just went off in a completely different position and after that the Ctrl and 1 function would not work at all.
Shut it all down and tried again, still nothing with the Ctrl and 1 function.
In the end i had to uninstall Stallerium, re install it again and now all works fine again.
I think i will just stay away from those functions in the telescope icon at the bottom at the page in Stallerium.
So all up, it all works fine now and the sysnc points show up as they should, i did 4 and 4 point showed up in the EQMOD box.
I did find that after slewing to the star, i had to click on it again and then do the Ctrl, shift,1
You might of mentioned that and i possibly skipped over it.
The only thing i changed in the telescope setup page was to enable the scope to start/connect at startup
Now just got to put it all into practice when we get some clear nights.
Very much appreciated.
Thanks.
Peter.
|