Quote:
Originally Posted by ntk.thava
I have discovered a design and reliability issue the GSO RC10 (carbon fibber) that most of you might not be aware. If you check the rear dovetail on the RC10 (top and bottom dovetails) you will see that the two outer screws (check with an allenwranch) are either loose or have been over tightened till there are burr on the screw thread. If you check carefully you will see that the rear dovetail section is only screwed by one screw and this can give way anytime due to the weight of the RC10. Please check and feedback to everyone.
|
No problems on my unit - bolts are snug but not overtight.