|
Thank Brent.
I am running the camera off 240 from inverter I want to get a plug to follow its draw.
Everything is working ran the cooler turned the wheel took some darks moved the mount to where I pointed on screen.but I could not detect if the focuser was moving it seems to respond only to the program in so far as I cant see that you can drive the focuser as such...but thats ok cause my first belt wont want to have to more too far.
But I have built a couple for testing.
I used sortta wet suit material which responded well to the glue the join is ultra strong. The focuser will move very little so I would have to hold it in...less work.
Nearly there.
Thanks.
Alex
|