Gday Chris
Quote:
So when I compared particular RA/Dec numbers on the Audiostar screen
|
The Audiostar uses cut down equations of motion to calculate the positions of many things. It also doesnt do precession calculations, and as such what it reports will differ from a fully up to date phone/pc app that can use all the latest data and calculations.
Quote:
the vendor only reloaded handbox firmware, so it's still the same new handbox hardware, as purchased.
|
Understood, there is nothing you can do re the hardware.
That said, there are big differences between some of the firmwares.
Quote:
Lastly ... Is this an ETX-90 problem only,
|
For not being able to select an ETX-90 correctly, yes, it only applies to the new units with the plugs in the fork.
As per the other thread, ( and as suggested by Meade ),selecting an ETX-80 will get the correct ratios so it points correctly, but thats just a cop out by Meade. They should have fixed it by now.
Andrew