Quote:
Originally Posted by multiweb
This might help. It's a shot of the sensor with the chamber flipped up.
The only thing to look for is the top right corner of the sensor in the photo. You can see two hairline thin wires. That's the TEC. Don't break these. The gasket is on the PCB. It's pretty thin. The black block is aluminium. Btw that's a QHY9 mono.
re: silicon, I have one reply so far on QHYCCD forums.
DOW CORNING
3140 RTV COATING
There is one supplier in Adelaide which I still have to contact:
SOUTH AUSTRALIA REYNELLA, ADELAIDE
ELLSWORTH ADHESIVES AUSTRALIA
TEL: +61 8 8321 9346
3/65 MOORE ROAD
REYNELLA, ADELAIDE SOUTH AUSTRALIA 5161 |
Thanks ,
It great to get all this QHY9 information together.
We have already exceeded what's on their QHY website.
The 2 photos I posted on flickr of inside the camera are the largest & most detailed I can find on the web.
Hopefully people can keep adding tips.
One more tip would be useful.
What is the best way to clean the window that covers the CCD & also the window in the nose of the QHY9?
cheers
Allan