View Single Post
  #2  
Old 21-09-2019, 01:48 PM
RyanJones
Registered User

RyanJones is offline
 
Join Date: Jun 2018
Location: Melbourne,Australia
Posts: 1,439
Hi Kev,

From memory the finder bracket just screws into the housing. The dovetail on the other hand has screws with nuts at the front end of the tube that can fall inside. To be 100% sure, undo the screws about 3 turns then push down on them. If they screw into the hosing as I remember, you won’t be able to push them down. If they are in fact a screw and nut, the screw will push down but the nut will still be on the screw so it won’t fall and damage anything. I hope this helps.

Cheers

Ryan
Reply With Quote