Quote:
Originally Posted by nightstalker
hi gary
thanks for the earlier reply.. In the new year I'll contact you with those measurements .. meanwhile i'll drop a pic here so I can easily referance you to it later... the clearance over my az bolt is tight 50 MM .. that counterweight dosn't have to be there.. my alt bearings are 24 mm ply with 3mm brass plate over the top.. its a 12" f5 .
thanks for your time
cheers graham
|
Hi Graham,
Thanks and what a nice looking scope!
If only it could talk.
It even looks to me as if it
wants a pair of encoders fitted!
The clearance of the Az bolt looks as if it should be OK and the Alt bearing
looks straight forward enough. In the New Year, drop us a line as you've
indicated with the requested measurements and I am sure we can come up with an
installation solution for you that will also be cost effective.
Best Regards
Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Fax +61-2-9457-9593
wildcard@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au