Quote:
Originally Posted by Dennis
Thanks for that. Last night, it appeared that when you “Enable” MLU, it greys out the interval timer button, so you are not able to set the 40D to grab say, 10 off 300 sec exposures. Also, with MLU Enabled, it looked like I was limited to 30 sec exposure as when I set Bulb, I couldn’t find a place to set the exposure to e.g. 60 secs, so I resorted to using the remote cable release. This may be just a learning curve as this was my first night with new camera and the unfamiliar Canon software
|
Hi Dennis,
I encountered the same problem 1st night out. Seems you cant program in multiple bulb exposures unless you disable MLU
. But with MLU enabled you can't access the remote functions of the software.
A programmable remote is the work around or live without MLU!
Cheers
Doug
