[Startrek (Martin)]

I’ve been using an MBeat 7 port hub ( only use 2 ports ) for a while now which has never worked properly on my Windows 10 laptop
I have EQMOD through it operating my telescope without any issue at all
I also have my mouse running through it which has been painful , sometimes works ok sometimes doesn’t
So I decided to do a test in Device Manager and plug the hub in by itself with its power supply on. Device manager flashes up and down and obviously can’t find it
I checked the MBeat website and apparently you don’t need a driver for this device
Any suggestions on either a new hub that will work ( a 4 port will do the job )
or other on Windows 10
By the way my laptop has a total of 3 x USB3 ports all used ( 1 port for the hub , 1 port for BYEOS and 1 port for PHD2?

Thanks in advance