Ok duh moment. I checked the polar alignment that I had done
using 2 runs if T Point accurate polar alignment routine. I used Pempro as that
has a polar alignment wizard which has been fairly accurate in the past.
There must be something off with my TPoint as my polar alignment
was not just a bit off but waaay off.
I was able to get an image done. At least 1 night out of 3 rare clear nights!
The more stupid thing about it is this same thing happened once before.
I think I’ll return to the policy if its all working din’t change anything. A polar alignment check/tweak is only needed if results go poor.
Greg
|