View Single Post
  #589  
Old 21-12-2019, 11:34 AM
gary
Registered User

gary is online now
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,526
Argo Navis Firmware Version 3..0.3 now available for download

Wildcard Innovations is pleased to announce Argo Navis Firmware Version 3.0.3.

To show our appreciation of your support, Wildcard are providing a free license (subject to your acceptance of our End User Licence Agreement) to Version 3.0.3 to you as a gift.

Version 3.0.3 is now available for download -
http://www.wildcard-innovations.com...._download.html

The End User Licence Agreement can be found here -
http://www.wildcard-innovations.com.au/EULA.html

To download the firmware, you will need to have registered and have a copy of your Registration Code.
If you registered in the past, you will receive a reminder of your registration code by email in due course.

If you have not registered before, you will find the registration link on this page :-
http://www.wildcard-innovations.com...._download.html

We highly recommend that you also download the following -

* Argo Navis User Manual Edition 11.
See http://www.wildcard-innovations.com....mentation.html
This edition of the User Manual includes a description of how to install and use the latest Argonaut Version 2.0 software utility for Windows (page 160).

* Argonaut Version 2.0 software utility for Windows.
See https://www.wildcard-innovations.com.au/utilities.html
A similar utility for Linux are available from the same URL.

To perform the firmware download to your unit, you will require the following additional components -

* Argonaut for Windows or sgzload for Linux.
These can be downloaded from here -
https://www.wildcard-innovations.com.au/utilities.html

* A serial cable for connection to your Argo Navis from your PC, Wildcard Innovations part number pn-ser-cbl.

If your computer does not have an RS-232 serial port, we recommend you use the serial cable in conjunction with the Keyspan USA-19HS USB Serial Adapter.
Wildcard Innovations also stock these as their part number pn-usb.

To purchase either or both of the above you can pay securely online using MasterCard, Visa or AMEX using this URL -
https://www.wildcard-innovations.com.au/purchase.html

To install Argonaut Version 2.0, refer to the step-by-step instructions starting on page 161.

To determine which version of firmware your unit currently has loaded, dial up MODE STATUS, STATUS VERSION.

We recommend you use Argonaut Version 2.0 to save your existing Argo Navis setups onto your PC. See page 182 on "Transferring setups".

If you are migrating from firmware version 3.0.0 or later, Argo Navis firmware Version 3.0.3 will preserve your setups.

However, if you are migrating from an earlier version than 3.0.0, then version 3.0.3 will restore your setups to factory defaults so we highly recommend you use Argonaut to save the setups so you can restore them later.

Please note that loading Argo Navis firmware version 3.0.3 will clear any existing asteroid, comet, satellite or user catalogs you already have loaded.
You should ensure you have the original data for any catalogs you may have loaded stored on your PC so that you can reload it after performing the upgrade.

To download a firmware file from your PC to Argo Navis, please refer to page 187.

Version 3.0.3 contains the following improvements :-

* Improved solution for some comet and asteroid orbits.
* More reliable first-time power-up when real-time clock coin cell battery becomes depleted or is replaced.


Should you experience any difficulties, simply email sales@wildcard-innovations.com.au for assistance.

We thank you again for your support and we hope you enjoy Version 3.0.3.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
wildcard@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote