Quote:
Originally Posted by wasyoungonce
I have to share my desk(s) with 3 daughters....all who demand room for their UNI/Tafe/School stuff.
So I have little chance to proclaim "my desk" . I'm relegated to a lower status than the dog!
But...I'm a bit anal as well...I like cct boards.
Adrian..I can send you my Board layout & Schematic I made in Eagle....if you use Eagle?
It's a bit oversized ..I was experimenting with ground planes...but "Meh"...it works. Main problem was I had to make a device layout for the PTN78020WAH (for the board pad layout) and getting 2.2 micro fard ceramic filter caps on input. I put caps in parallel to add up to the req'd value.
Anyway...my 2 cents worth.
|
Fortunately I have my own desk, so does my wife. At one stage we were both studying and working so we both needed a PC each. So we have one room with 2 desks and 2 PC's then we decided we both needed laptops as well. So we have 2 PC's 2 laptops and now my employer as thrown a laptop at me aswell. Now if I could find my Jornada PD I would look like a proper geek....
Adrian