|
What Luka said above^
The problem is that the ZWO drivers make you choose *which camera you want *inside the driver itself. The program only sees the one driver, unlike with ASCOM which will differentiate the two cameras in the dropdown.
My Suggestion; trash all your PHD profiles and start again (they only take a few minutes to set up anyway). Don't run any other software. Don't have your imaging camera plugged in, only the guide camera.
Go through and set up your profile/s (click the little divided arrow symbol to check it's looking at the correct camera).
After that, close PHD and try plugging in the imaging camera. Open again, see if the profile connects to the correct camera.
Then try it with your sequencing program (SGP/Voyager) connecting to the imaging camera at the same time.
I had the same issue a week or so back and this is what solved it for me.
Cheers
Markus
|