|
Before modifying my Nikon d5600 I never had any dust issues as DSLR's are generally self cleaning.
With removal of the camera filter the chip always gets dust on it if I use a zoom lens, but the dust is easily removed with a puffer.
I generally don't get any dust on the chip when using the camera on a telescope, but I'm careful with handling in order to minimise the possibility of dust entry (keep a cap on, keep camera face down, keep the cap face down on a clean surface, etc).
Immediately after modifiying the camera there were spots on the chip so I did a wet clean with isopropyl; the most difficult part of the procedure was accessing the APSc sized chip deep in the camera body. It would have been much easier to clean the chip while it was out of the camera.
|