Rob, thank you for your kind words and for the help testing the driver
I have uploaded version 0.8.1 to the
Google Drive shared folder. Lots of changes and bug fixes behind the scenes. Screenshots are attached.
At the moment, with Rob's help, we have confirmed that the driver is working for:
TEMPer1F_H1_V1.4
TEMPERHUM1V1.3
Also supported but untested are:
TEMPer2HumiV1.x
TEMPerHumV1.0rHu
TEMPerHumM12V1.0
TEMPerV1.2
TEMPer2V1.3
TEMPerNTC1.0
TEMPerHumM12V1.2
TEMPerHumM12V1.3
The other devices may work as well but again I have no way to test them.
Instructions:
- Connect device and go to ASCOM properties for the TemperHum driver
- Click Detect Device
- If the message says that everything is working, click OK and you are set to go
You can test if it works by clicking Read Sensors
- If you get an error message click OK to expand the window and search for HID devices (right hand side of the window)
- Find the HID device that looks like a TemperHum device and copy the PID and VID to the left hand side of the window (click advanced first)
- Play with different devices and different sensors until you get valid readings.
Make sure you keep the PID and VID as found above.
If you find a working configuration for untested or new device please send the settings to me (screenshot is enough) and I will add that device.