View Single Post
  #31  
Old 08-09-2011, 07:28 PM
hotspur's Avatar
hotspur (Chris)
Registered User

hotspur is offline
 
Join Date: Apr 2009
Location: south east QLD,Australia
Posts: 2,868
re AG

Thank you Greg

For taking the time to give a very informative post-Yes,I does appear the thread is very useful for many trying to get AG going smoothly.

I have had the good fortune to talk with Clive,talking on phone really gets things sorted.

Unfortunately,there is so much smoke in air,I cannot test.But it certainly does appear the RA aggressiveness settings are too high,even at 50% on the Vixen GPD2-the AG os over correcting,so will back off to 20%

Also-a big mistake I made-the calibration step,I was under the impression this setting applied to the guiderscope,but its the imaging scope it applies too.I had the setting at the wrong end.

So between those two,-now understanding that,I hope to have improvements again.

The mount is all PA etc-its all in observatory, Greg,But will go over your post and check points you mention.

Thanks Chris
Reply With Quote