Quote:
Originally Posted by Alchemy
Are you using phd?
Can you set the guide speed ie 0.5 sidereal
I set my aggressiveness to 10%, but I do use a g11 you may need quicker if the mount is less accurate.
Watching the screen calibrate will give you the idea, just set it so you can just determine movement in the calibration routine.
If you're not using phd..... ,meh ... cant help
|
Yes,Clive using PHD.
I've just been outside,in observatory,I am just about to shut it up,its blowing a gale.But I put backlash to 0,and the mount and controller behaved very similar to when I had it 300,a little time lag between pressing button to manual control.but not a issue.
I checked PA,and it was out a bit,so lined it up.Hopefully tomorrow I will be able to try some guiding.The RA agresiveness had been set at 100,so will turn that down.
There could be hope that,this could work properly.
Cheers Chris