View Single Post
  #23  
Old 24-11-2017, 04:44 PM
alex-borek
Registered User

alex-borek is offline
 
Join Date: Oct 2017
Posts: 36
Quote:
Originally Posted by AndrewJ View Post
Gday Alex
If it is FTDI then it should work. The only problems reported were for some of the prolific chips.
As for the USB HUB, that is irrelevant here as if you plug in the device, it should show as a new COM port.
ie unplug the device
open device mangler and open the LPT ports section.
( it should be empty ?? )
plug in the shoestring
If it auto detects and shows under there as a COM port ( without an error or warning ), then it is being detected properly.
Another test is to put a loopback link in the subD connector to link the Tx to the Rx lines.
Use my app to try and connect
the log "should" show :e1[0D] being sent, and then echoed back in as received

Andrew
I don't think I have anything to perform this test...
Any idea to test my mount?
Reply With Quote