|
I should add that I have tried to power the EFW directly from the laptop.
Powers up fine, tried to calibrate/initailise using the EFW Tool, manually setting to position 1, hit the initailise key, it run and then returns to 75% of position 2 (going towards position 3).
If I manually set to position 1 again, it will return back to the 75% of position 2, if I reposition to a different number (say 4), the it will return to a +75% offset position on the next filter (75% of position 5).
I hope I am making sense.
Anyway, it seems to be a EFW driver issue not recognising it's a 7 position wheel ...
More investigations to be had!
Bo
|