Quote:
Originally Posted by jwoody
Hello Gary
Did you use the TIP 3055 transistor or something else?
Thanks
Jeremy
|
Used a TIP35C picked up in error from Jaycar :-) wiring was the same....(but 25 amp capacity is a bit of overkill)
Beware the schematic early in the thread on CN - it is wrong and will kill an UNO. Read post number 5 - I wired it up per the written instructions here.
I believe a corrected schematic was posted later in the thread.
Gary
PS It is really cool watching Voyager change the light level until exposures reach the target ADU