Quote:
Originally Posted by Lognic04
|
OK so you have a small scratch. Has the previous apparently large pit changed?
I'm not sure I would blame the tool yet. More likely you have some contaminant in the wet - dust, rough section of bevel etc. Always look for the simplest explanation first. Check your bevel. Clean everything and check the powder when you add it with your finger tips. If you feel roughness, clean up and try again. It might also be worth working mainly mirror on top.
If it's only one small scratch I would leave it and move on but if you have many, you will need to go back to coarser grit to remove them.
Hopes that helps.
Rod.