Thread: EQ6 Hypertune
View Single Post
  #59  
Old 29-10-2011, 08:07 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,932
Quote:
Originally Posted by Poita View Post
Is there anything that can be done about the gear transfer problem?
Yes, apart from cleaning or replacing them with high-precision gears (expensive!), you can have a look what I have done about it. However, this was not hyper-tuning - this was modification, so my reply is somewhat OT..
http://www.iceinspace.com.au/forum/s...ht=timing+belt
Many others before me did it (I was just following their example), with good results.

The presented mod still have one gear transfer stage (1:4) but currently I got rid of this one as well, so now the motor drives the timing belt directly.
I only need some free time and nice weather to test it.
The processor h/w & f/w used at the moment are according to Darren's mod presented on his website (http://projects.gbdt.com.au/eq6-1/ , it supports various transfer reduction rates), but my final intention is to use Mel Bartel's software with this, once the mount is permanently set up.

Last edited by bojan; 29-10-2011 at 09:43 AM.
Reply With Quote